SOULNOTE P-3 BE REFERENCE PREAMPLIFIER MADE IN JAPAN
RM90,000.00
Brand: SOULNOTE
Quantity: 1
Soulnote P-3
PREAMPLIFIER – available in Premium Silver / Premium BlackFully integrated ultralow-loss custom relay RSR-2-12D and naked foil resistor. A monster preamplifier for truly live and enjoyable music performances!
TECHNOLOGY
Type-R circuits are used inside the non-NFB balance amplifier
The output line amplifier uses Type-R discrete non-NFB balance circuits that have been finely tuned for preamplifier use.It also includes the newly-developed super high-quality naked foil resistors. With 1ohm emitter resistors and 3.9ohm output resistance, it delivers astonishing information detail and S/N presence for superior power preamplifier drive capabilities.
High-end resistance switching method audio volume control circuit
GND switching input selector
Complete dual monaural construction
Completely separate GND
The left channel, right channel, and control systems each have a ceramic-insulated chassis to achieve complete separation of the left, right and control GND. Each GND can be connected through the rear switch settings, but because each GND is completely separate, the listening experience offers an incredible expansive three-dimensional sound field with expressive, natural sound.Extremely powerful power transformer
Vertical transformer mounting
The transformer is mounted vertically on the circuit board, so any harmful leakage flux is oriented parallel to the circuit board, to prevent possible circuit ingress.Unfixed AC inlet base
Audiovisual source bypass function
Each XLR and RCA circuit has an audiovisual source bypass setting that can fix volume and output with zero gain.
Floating construction
The Type-R circuit board and top cover are mounted in a floating construction without mechanical fixing. Freeing the P-3 from mechanical stress and the harmful effects of air dumps creates a natural sound quality and soundscape similar to removing the top cover.
GND anchor
The left and right side metals are isolated from the main chassis by ceramic washers and are directly connected to separate left and right GND. This amplifies the benefits (more expansive soundscape and clearer feeling) of the left and right GND floating construction.
Multiple device connection system
Multiple devices can be connected using UART signals. Master and slave settings allow all slave settings to follow those of the master. This allows duplicating differences in the master volume to the slaves. This feature enables, for example, multi-amplifier volume control via a digital channel divider following DA conversion. And, of course, these connections completely avoid GND loops or other issues thanks to the floating GND control system.RSR-2-12D (Reference SOULNOTE Relay)
Ultra high-quality naked foil resistors
SPECIFICATIONS
Input | XLR x4, Cinch x4 |
Output | XLR x3, Cinch x1 (selectable XLR or Cinch) |
Total harmonic distortion | 0.0015% (1.5Vrms) |
Frequency characteristic | 2Hz ~ 1MHz (±3.0dB) |
Residual noise | 13μV (20kHz L.P.F.) |
Maximum output | 21Vrms |
Output impedance | 6.8ohm |
Maximum gain | 11dB |
Power voltage | 230V AC 50Hz |
Power consumption | 20W |
Maximum external dimensions | Main unit: 454(W) × 174(H) × 430(D)mm |
Weight | 25kg |
Included accessories | Spike board, spikes, remote controller, power cable |
Inquiry - SOULNOTE P-3 BE REFERENCE PREAMPLIFIER MADE IN JAPAN