Audio Technica AT-LPW40WN Fully Manual Belt Drive Turntable
RM1,599.00
Quantity: 2
Product Description
AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
- Walnut effect wood veneer finish
- Connect directly to speakers at home with the built-in phono preamplifier
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- AT-HS4 headshell and AT-VM95E Dual Moving Magnet phono cartridge
- Professional anti-resonance, die-cast aluminium platter with rubber mat
- Straight carbon-fiber tonearm with hydraulically damped lift control
Type: 2-speed, fully manual operation
Motor: DC servo motor w/speed stability control
Drive Method: Belt drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminium
Wow and Flutter: 0.15% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >60dB
Phono Output Level: 4 mV nominal at 1 kHz, 5 cm/sec
Line Level Output: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
Power Supply Requirements: 100-240V AC, 60 Hz
Power Consumption: 1 W
Dimensions (WxHxD): 420 x 117 x 340 mm
Weight: 4.7kg
Accessories Included: AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter
Tonearm type: Balanced straight tonearm with detachable headshell
Effective arm length: 223.6mm
Overhang: 18.6mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17g
Anti-skating range: 0-3g
Replacement Stylus: AT-VMN95E
Inquiry - Audio Technica AT-LPW40WN Fully Manual Belt Drive Turntable